Chain Link Ties
Overview
What chain link ties do
Chain link ties secure the fence fabric to the framework so the mesh stays tight, aligned, and quieter in the wind. They’re used on line posts and along the top rail (and sometimes a bottom rail or tension wire, depending on the build).
Line post ties
Wrapped around the mesh and the line post to keep spacing consistent and help prevent bowing between posts.
Top rail ties
Fasten the fabric to the top rail so the top edge stays straight and resists sagging, rattling, and minor impacts.
Material match matters
Using the right tie material helps reduce corrosion and keeps the fence looking consistent, especially on vinyl-coated systems.
Proper spacing
Correct tie spacing helps the fence perform as expected and reduces premature wear at attachment points.
Tie types
Aluminum, galvanized, and vinyl-coated
Replacement
When ties should be replaced
Ties are small parts, but they do a lot of work. When they fail, the fabric can loosen, shift, and start stressing other components. Here are common replacement scenarios we see in Louisiana:
Rust or corrosion
If ties are heavily rusted, they can snap during storms or when the fence is bumped. Replacing them early helps prevent fabric pull-away.
Broken or missing ties
Gaps in tie coverage let the mesh move, which can lead to noise, sagging, and faster wear at the remaining attachment points.
Loose fabric after impact
Vehicle contact, fallen limbs, or equipment bumps can pop ties loose. Re-tying and re-tensioning helps keep the fence straight and secure.
Coating damage on vinyl systems
If vinyl-coated ties are cracked or missing, the exposed metal can corrode and stain the coating. Replacing ties helps keep the finish clean.
Need chain link tie replacement?
Send a few photos and we’ll recommend the right tie type and spacing for your fence.